Most people think they can casually install a window air conditioner with no problem. But several things need to be done right for your new AC unit to function smoothly for a long time.
Installation errors are an all too common source of problems with new air conditioners. That’s why it is better to hire a professional air conditioning installation Jupiter than do the job on your own.
Here are five common AC installation mistakes DIYers make:
Ignoring AC sizing requirements
A new air conditioner is a major purchase, so it is important to get the right size to meet your needs. The most important thing to keep in mind when choosing the right size air conditioner is to make sure you are sizing the unit correctly for your home. To do this, you need to do some calculations and consider both the square footage of your home, as well as room size.
Installing an air conditioner that is too big or too small for your home can result in poor AC performance and high energy bills. An oversized AC unit will turn on and off more frequently, while an undersized unit will struggle to reach your comfort level at home.
Placing the AC in a bad location
The location of the air conditioner is important if you want the most from your unit. The right location will have both a cooling impact, such as on your living room or bedroom and a dehumidifying effect in the room where it is placed. If the air conditioner is installed in a place where it can neither dehumidify nor cool, then it will be ineffective.
As a general rule, you should place your split-type air conditioner at the center of the room you want to cool. This will allow clear, balanced airflow throughout the space. It should be installed at a proper height to make sure it does not block the passageway. The ideal height for installing split-type ACs is 7 feet from floor level.
Incorrectly positioning the thermostat
Having a top-grade thermostat to work with your air conditioning system will provide you with many benefits. These include ease of use, reduced cooling costs, and total control of your HVAC. However, you can only get all these benefits if you install your thermostat correctly.
The United States Department of Energy requires that you keep your thermostat away from heat sources, such as windows or supply registers. Otherwise, the device will read the wrong temperature and cause a skyrocketing energy bill.
Replacing only parts of the system
Did you know that replacing only the part that failed can cause more trouble and expense down the road? That’s because some parts in your air conditioner work together and if you replace only one of those parts, the other components could fail.
When choosing a replacement air conditioner, consumers usually think they can lower their energy costs by purchasing just the part of the air conditioner that is broken-compressor, condensing unit, blower motor, or fan coil. This is a big mistake. Nothing works better than a complete air conditioning system that can offer whole-home comfort and efficiency. Replacing only some of the unit’s components could end up being more expensive than simply buying a new model.
Hiding the outdoor AC unit
Your outdoor air conditioning unit is an essential part of the cooling system and can provide both cooling and heat if needed. However, when installed in a crowded space in your yard, it won’t be able to function properly. Hiding your condenser behind potted plants or shrubs will restrict the smooth flow of air to and from your system. AC manufacturers generally recommend between 12 and 24 inches of clearance on all sides of the unit.
If your air conditioning system suffered damage due to an improper installation procedure, have it serviced by a pro immediately. Waste no time and schedule a professional ac repair Jupiter. Do not delay the repair needs of your AC. Otherwise, you will run the risk of damaging your system and home. Get in touch with your trusted HVAC professionals today to learn about their rates and terms of service. Make the call now!